Roofing & Exterior

Concrete & Driveways: A Homeowner’s Hiring Guide

Everything to know before you hire for concrete & driveways — what the work involves, what drives the price, and how to pick someone good. Then tell local pros what you need and compare.

Updated

Get free quotes

Concrete driveway work can range from patching a small area to removing and rebuilding the entire drive, apron, or sidewalk. The right scope depends on the damage, drainage, soil and base conditions, and how the driveway connects to the street.

Before hiring, check local permit and inspection requirements. Rules differ by jurisdiction, especially for work in a public right-of-way, driveway aprons, drainage changes, and new or expanded paved areas. ([raleighnc.gov](https://raleighnc.gov/residential-driveway-installation?utm_source=openai))

Signs you need help with concrete & driveways

  • Large or widening cracks, uneven slabs, or sections that have settled or lifted.
  • Standing water, runoff toward the house or garage, or water pooling near the sidewalk or street.
  • A surface that is breaking apart, scaling, or losing aggregate across broad areas.
  • Repeated patch failures or cracks that return after repair.
  • A driveway that is too narrow, steep, or awkward for everyday vehicle access.
  • Damage to the driveway apron, curb, or sidewalk that may extend into the public right-of-way.

What affects the cost

Scope and demolition
Replacing an entire driveway involves more removal and disposal than repairing a limited area. Ask whether the proposal includes hauling away old concrete and managing debris.
Soil and base preparation
Soft, uneven, or poorly drained ground may need excavation, added base material, and compaction. A new slab can still settle if the ground below it is not properly prepared.
Drainage and grading
The slope, driveway entrance, nearby structures, and route for runoff can affect the amount of grading and drainage work required. Get the proposed slope and water path explained before work begins.
Concrete design and reinforcement
The specified thickness, concrete mix, reinforcement, and joint layout should suit the site, expected vehicle use, climate, and local requirements. Ask the contractor to identify these in writing.
Size, shape, access, and finish
Large or irregular layouts, limited access for equipment and delivery trucks, and decorative finishes can require additional labor, materials, or coordination.
Permits, utility locating, and inspections
Work in a right-of-way, changes to an apron or curb cut, drainage changes, or local inspection requirements can add coordination and time. Confirm who is responsible for permits and inspections.

How the job usually goes

  1. Inspect and plan: The contractor assesses the existing slab, soil, drainage, access, and project boundaries, then identifies the proposed scope and finish.
  2. Confirm approvals and locate utilities: Check permit and inspection requirements with the local building or public works department. Before excavation, make sure the required 811 request has been made; ask whether any privately owned lines need separate locati
  3. Remove and prepare: The crew removes the old concrete if needed, grades the area, and prepares and compacts the subgrade and base. Forms establish the slab’s edges and grade.
  4. Place concrete: The crew places and consolidates the mix, then levels and finishes it. An exterior driveway typically needs a finish that provides traction.
  5. Form or saw control joints: Joints are planned to encourage shrinkage cracks to occur in intended locations; they reduce random cracking but cannot guarantee a crack-free slab. ([cement.org](https://www.cement.org/cement-concrete/working-with-concrete/?utm_sou
  6. Cure, protect, and inspect: The contractor applies an appropriate curing method, protects the slab from traffic and weather, completes cleanup, and arranges any required inspection. Curing helps concrete develop strength. ([cement.org](https://www.cement.org/c

How long it takes

A straightforward project’s on-site work may take one to several days, depending on demolition, access, site preparation, weather, and scope; permit review or inspections can add time. Concrete needs curing and protection after placement, so confirm the contractor’s written instructions for foot and vehicle access rather than assuming it is ready when the surface feels hard. ([cement.org](https://

How to choose a good pro

  • Check the rules for the exact work area. A private driveway and the section in the public right-of-way may have different permits, contractors, and inspections. Ask the local authority which requirements apply. ([raleighnc.gov](https://raleighnc.gov/residentia
  • Verify any required state or local license, and request current proof of insurance. Check licensing information with the relevant government board or agency. ([consumer.ftc.gov](https://consumer.ftc.gov/articles/how-avoid-home-improvement-scam?trk=article-ssr-
  • Compare written proposals that describe the same scope, including demolition, base preparation, concrete specifications, reinforcement if specified, joints, finish, cleanup, and exclusions.
  • Ask for references for similar driveway jobs and, if practical, look at completed work that has been in service through local weather conditions. ([bulkorder.ftc.gov](https://www.bulkorder.ftc.gov/system/files/publications/pdf-0057-hiring-contractor.pdf?utm_so
  • Get a written contract with the scope, materials, start and expected completion dates, payment schedule, change-order process, permit responsibilities, and warranty terms. Read it before signing and do not leave blank spaces. ([consumer.ftc.gov](https://consum
  • Ask how the crew will manage excavation and concrete-cutting hazards. OSHA identifies silica dust from concrete cutting and grinding as a hazard and describes wet methods and other exposure controls; workers should also avoid skin and eye contact with wet conc

Questions to ask before you hire

  • What permits, right-of-way approvals, and inspections apply, and who will arrange them?
  • Who will request the 811 utility locate, and how will private utility lines be handled?
  • What removal, excavation, base preparation, and compaction are included?
  • What concrete mix, thickness, reinforcement, slope, and joint layout are you proposing, and why are they suitable for this site?
  • How will you direct water away from the house, garage, neighboring property, and sidewalk?
  • What finish will be used, how will the concrete be cured and protected, and when may people and vehicles use it?
  • Who will supervise the work, handle changes, and provide the written warranty?

Do it yourself or hire a pro?

DIY may suit a small surface patch or crack repair when the area is stable, drainage is already correct, and the product instructions fit the repair. Full driveway replacement is usually better left to an experienced concrete crew: excavation, grading, compacting, forming, placing, finishing, and jointing have to be coordinated quickly, and mistakes can affect drainage and durability. Concrete cutting and grinding can create hazardous silica dust, while wet concrete can injure skin and eyes; use appropriate controls and protective equipment, and consult a qualified professional when the work involves excavation, structural concerns, or public property. ([osha.gov](https://www.osha.gov/silica

Red flags

  • The contractor urges you to start before required permits, utility locates, or inspections are addressed.
  • The proposal is vague about removing old concrete, preparing the base, managing drainage, or what concrete work is included.
  • The contractor will not provide references, required license information, proof of insurance, or a written contract. ([consumer.ftc.gov](https://consumer.ftc.gov/articles/how-avoid-home-improvement-scam?trk=article-ssr-f
  • The crew dry-cuts or grinds concrete in a way that creates visible dust without explaining its silica-dust controls. ([osha.gov](https://www.osha.gov/silica-crystalline/construction-info?utm_source=openai))

Frequently asked questions

Do I need a permit to replace a concrete driveway?

It depends on your local rules and the project. Work in a public right-of-way, changes to an apron or curb cut, new or expanded paving, and drainage changes may trigger permits or inspections. Ask your city, county, or road authority before work begins. ([raleighnc.gov](https://raleighnc.gov/residential-driveway-installation?utm_source=openai))

Can a cracked concrete driveway be repaired, or does it need replacement?

A contractor can assess whether a limited repair is reasonable or whether widespread cracking, settlement, base failure, or drainage problems call for replacement. Ask what is causing the damage and how the proposed repair addresses that cause.

Will a new concrete driveway crack?

Concrete can crack as it hardens and changes with temperature and moisture. Planned joints help guide cracking to selected locations, but they cannot promise that no cracks will occur. ([cement.org](https://www.cement.org/cement-concrete/working-with-concrete/?utm_source=openai))

How long before I can drive on a new concrete driveway?

There is no single safe interval for every project. It depends on the concrete, weather, curing, and vehicle load. Follow the contractor’s written instructions and ask separately about passenger vehicles and heavier vehicles.

Why does driveway drainage matter?

Poor slope or drainage can leave water standing or direct runoff toward buildings, sidewalks, or neighboring property. Ask the contractor to explain the planned grading and where water will flow before the concrete is placed.

Should I call 811 before a driveway replacement?

Excavation can encounter buried utilities. Confirm that the required 811 locate request has been made before digging; utility locating services may not mark privately owned lines, so ask whether separate locating is needed. ([usan.org](https://www.usan.org/diyers?utm_source=openai))

Sources

Concrete & Driveways services

    Concrete & Driveways by city