Before Hanging Holiday Lights, Check These Safety Details

Holiday lights are coming out as decorating season begins. A quick check of each string and how it will be used can help reduce fire and electrical risks at home.

Published

Why check your lights now

For many households, late November is when holiday lights and decorations go up. Before plugging in last year’s lights—or installing a new set—look for wear and check that the product is intended for the place you plan to use it. The Consumer Product Safety Commission (CPSC) says to use lights tested for safety and discard sets with broken sockets or frayed wires. The National Fire Protection Association (NFPA) also advises replacing strings with worn or broken cords or loose bulb connections. ([cpsc.gov](https://www.cpsc.gov/s3fs-public/NSN-01-112025_Holiday.pdf?utm_source=openai))

This is more than a cosmetic check. NFPA reports that U.S. fire departments responded to an average of 143 home fires started by Christmas trees each year from 2020 through 2024. Electrical distribution or lighting equipment was involved in two in five of those fires. These figures do not mean a particular light string is unsafe, but they show why inspecting lights and following their instructions matters. ([nfpa.org](https://www.nfpa.org/education-and-research/home-fire-safety/winter-holidays?l=49&utm_source=openai))

Match the lights to the location

Check the product label and packaging to confirm whether each string is for indoor use, outdoor use, or both. NFPA notes that some light strings are designed for only one setting. Don’t assume that a string used indoors is suitable for a roofline, porch, or yard. If the original packaging is gone and the label does not make the intended use clear, don’t guess.

Use the manufacturer’s directions to determine how many strings can be connected. For incandescent lights, CPSC says never to connect more than three sets together, and not to overload electrical outlets. That three-set limit is specifically for incandescent strings; follow the instructions for other products rather than applying it as a universal rule. ([cpsc.gov](https://www.cpsc.gov/Safety-Education/Safety-Education-Centers/Holiday-Safety?language=en&utm_source=openai))

Hang lights without damaging the cords

For outdoor decorating, NFPA recommends using clips—not nails—to hang lights, so the cords are not damaged. Before installation, check the full length of each string, including plugs and bulb connections. Put damaged or questionable strings aside instead of trying to make them work for one more season. CPSC identifies seasonal lights missing safety features such as adequate wire size, strain relief, or overcurrent protection as a risk for electric shock or fire. ([content.nfpa.org](https://content.nfpa.org/-/media/project/storefront/catalog/files/safety-tip-sheets/winterholidaysafetytips.pdf?rev=ff85ca4386a341ea9f5cec34b06b6382&utm_source=openai))

If putting lights up means working near roof edges or other difficult spots, don’t let the calendar rush the job. Choose a setup you can complete safely; the safety advice in these sources focuses on sound lights, proper use, and avoiding cord damage—not on finishing decorations by a certain date.

Switch decorations off when you leave

Make switching off light strings part of the bedtime and leaving-home routine. NFPA advises turning off light strings and decorations before going to bed or leaving home. CPSC also recommends turning off holiday lights when no one is home or awake to monitor them. If a product’s instructions give specific operating directions, follow those too. ([content.nfpa.org](https://content.nfpa.org/-/media/project/storefront/catalog/files/safety-tip-sheets/winterholidaysafetytips.pdf?rev=ff85ca4386a341ea9f5cec34b06b6382&utm_source=openai))

The practical checklist is simple: inspect, verify indoor or outdoor use, follow the connection instructions, hang with clips, and switch lights off when the home is unattended. These steps apply whether the display is a few strings around a window or a larger seasonal setup.

What to do

  • Inspect every string for frayed wires, broken sockets, or loose connections.
  • Check whether lights are intended for indoor, outdoor, or both uses.
  • Follow the package’s connection limits; never connect over three sets of incandescent lights.
  • Use clips instead of nails to hang outdoor lights.
  • Turn lights off before bed or leaving home.

Sources