Before Winter Heating: Check Your CO Alarms and Furnace

Michigan agencies issued a November 2026 reminder about carbon monoxide safety as people prepare for colder weather. Here are practical steps homeowners across the U.S. can take before relying on fuel-burning heat.

Published

A timely reminder as heating season begins

On November 9, 2026, Michigan health, licensing and state police agencies urged residents to check carbon monoxide (CO) safety before winter. The reminder is useful beyond Michigan: the U.S. Fire Administration says a furnace, heater or generator that is not working or vented properly can expose people to CO. Gas- and oil-burning furnaces produce the gas, which has no color or smell, so a person cannot reliably detect it without an alarm. Symptoms can include headache, fatigue, dizziness, nausea, confusion and shortness of breath. ([michigan.gov](https://www.michigan.gov/mdhhs/inside-mdhhs/newsroom/2026/11/09/2026-co))

Who should act

This matters to anyone using a fuel-burning furnace, water heater, fireplace or other appliance, and to households that may use a portable generator during an outage. Children, older adults and developing babies may face greater risk, according to Michigan’s health department. Renters can check alarms and notify a landlord about an overdue heating-system inspection; homeowners can arrange the inspection themselves. Alarm requirements can vary by location, so check local rules as well as the alarm maker’s instructions. ([michigan.gov](https://www.michigan.gov/mdhhs/inside-mdhhs/newsroom/2026/11/09/2026-co))

Three checks to do now

First, check that CO alarms are present and working. The U.S. Fire Administration recommends alarms outside each separate sleeping area and on every level of the home. Follow each alarm’s instructions for testing and replacement; the Consumer Product Safety Commission notes that the test button checks the circuitry, not the accuracy of the sensor. Smoke alarms do not detect CO. If you need an alarm, choose one that meets the current UL 2034 standard and install it as directed.

Second, if your home has fuel-burning heating equipment, arrange its annual professional inspection if it is due. The CPSC recommends that the heating system be checked for proper operation and that chimneys and flues be checked for blockages, corrosion or loose connections. This is a safety inspection, not a reason to assume every furnace has a problem.

Third, keep outside vents clear of snow and debris during winter. The U.S. Fire Administration specifically includes furnace, dryer, stove and fireplace vents in its advice. Do not run a car in an attached garage, even with the door open; never use a gas oven to heat the home; and operate portable generators outdoors, at least 20 feet from enclosed structures, following the manufacturer’s instructions. ([usfa.fema.gov](https://www.usfa.fema.gov/prevention/life-safety-hazards/carbon-monoxide/index.html))

If an alarm sounds

Leave immediately and get everyone outside into fresh air. Call 911 or the fire department from outside, and do not go back in until responders say it is safe. Do not stay inside to search for the source or wait to see whether the alarm stops. If anyone has possible CO symptoms, seek prompt medical attention. A working alarm and a maintained heating system are separate safeguards: neither makes unsafe generator or appliance use safe. ([michigan.gov](https://www.michigan.gov/mdhhs/inside-mdhhs/newsroom/2026/11/09/2026-co))

What to do

  • Check CO alarm coverage and test alarms using the manufacturer’s directions.
  • Arrange an annual inspection for fuel-burning heating equipment if one is due.
  • Keep exterior vents clear and use generators outdoors, at least 20 feet from enclosed structures.
  • If an alarm sounds, get outside and call 911; do not reenter until responders say it is safe.

Sources