Remodeling & Renovation

Tile Services: A Homeowner’s Guide to Hiring a Pro

Everything to know before you hire for tile — what the work involves, what drives the price, and how to pick someone good. Then tell local pros what you need and compare.

Updated

Get free quotes

Tile professionals install, repair, and replace tile on floors, walls, backsplashes, showers, tubs, fireplaces, and some outdoor surfaces. A successful job depends on more than neat grout lines: the surface beneath the tile, waterproofing where needed, and the right materials for the location all matter.

Before hiring, define the area and finish you want, then check local permit requirements and ask how the pro will prepare the surface and manage dust. Tile-only work may not need a permit, but rules differ by jurisdiction and plumbing, electrical, structural, or other renovation work may trigger one.

Signs you need help with tile

  • Tiles are loose, cracked, hollow-sounding, or separating from the surface.
  • Grout is cracking or missing repeatedly, or flexible joints at corners and transitions have failed.
  • A shower, tub surround, or other wet area shows water staining, swelling, a persistent musty odor, or damage in the adjoining room.
  • The floor is uneven, bouncy, or cracked, or the tile has been damaged by movement in the underlying surface.
  • You are remodeling a kitchen, bathroom, entry, or other area and need tile selected and installed for its use.
  • The existing tile has widespread damage, or a small repair cannot be matched with available tile.
  • You want outdoor tile and need a system suitable for the local climate, exposure, and underlying surface.

What affects the cost

Project size and layout
The area to be tiled, room shape, corners, niches, edges, stairs, and number of cuts affect labor and material needs.
Tile selection and pattern
Tile size, thickness, material, finish, and pattern influence handling, cutting, setting, and grout-joint work. Intricate layouts or small mosaics can take longer than straightforward patterns.
Surface preparation
Removing existing tile, correcting unevenness, repairing a damaged substrate, or preparing a surface that is not sound or suitable can add work.
Waterproofing and drainage
Showers and other wet areas need an appropriate waterproofing system and correctly detailed transitions, drains, corners, and penetrations. The scope depends on the existing assembly and planned changes.
Access and protection
Occupied homes, limited work space, stairs, difficult material handling, and the need to protect nearby finishes can affect setup and cleanup.
Repairs and related trades
Hidden water damage, mold concerns, plumbing or electrical changes, or work involving structural elements may require additional assessment, separate trades, and coordination.
Tile and setting materials
The tile type and location determine which mortar, grout, membranes, movement-joint sealants, and edge details are appropriate. Ask the pro to specify the proposed system.

How the job usually goes

  1. Inspect and plan: The pro measures the area, reviews the tile and layout, checks access and existing conditions, and identifies questions about the substrate, water exposure, or related work.
  2. Confirm scope and requirements: The written proposal should describe removal or protection of existing finishes, surface preparation, waterproofing if applicable, materials, cleanup, and responsibility for any permits or inspections.
  3. Protect and remove: The work area is isolated and nearby finishes are protected. Existing tile or other material is removed only after considering potential hazards in older buildings.
  4. Prepare the surface: The installer checks that the substrate is suitable, stable, and within the product system’s requirements, then completes needed repairs and preparation.
  5. Install the assembly: Where needed, the installer applies the specified waterproofing and details transitions before setting tile. Tile is laid to the planned lines, with appropriate mortar coverage, cuts, and movement joints.
  6. Grout, finish, and review: After the setting material has had the required time, grout and flexible sealant are applied as appropriate. The installer cleans the area, explains care and cure times, and reviews the completed work with you.

How long it takes

A small, simple tile job may take a few workdays, while a full bathroom or shower renovation can take substantially longer because of demolition, repairs, inspections, and required setting or waterproofing cure times. Ask for a written schedule with days when the area will be unusable and any product-specific wait times before use.

How to choose a good pro

  • Check your state or local contractor licensing board for applicable license requirements, status, disciplinary history, and whether the pro is authorized to do the work described.
  • Ask for proof of liability insurance and, where applicable, workers’ compensation coverage; verify the documents with the insurer or issuing source.
  • Look for recent, relevant examples of completed work, especially the same type of project—such as a shower, large-format floor, or exterior tile.
  • Request a written, itemized scope that identifies who supplies tile and setting materials, what surface preparation and waterproofing are included, how changes are handled, and what cleanup is expected.
  • Ask the installer to name the planned products and explain how they work together. Check that installation follows the tile and material manufacturers’ instructions and applicable industry methods.
  • Get a clear schedule that accounts for preparation, setting, grout, inspections if required, and product cure times; ask what could change the schedule if hidden damage is found.
  • Review the warranty and payment schedule in writing. Confirm who will obtain any required permits and arrange inspections before work begins.

Questions to ask before you hire

  • What preparation does this surface need, and how will you confirm it is suitable for tile?
  • For a shower or other wet area, what waterproofing system will you use, and how will you handle corners, seams, plumbing openings, and the drain?
  • Which tile, mortar, grout, and sealant do you recommend for this location, and will you follow their installation and cure instructions?
  • What is included in the written scope, and how will you document and approve additional work if hidden damage is found?
  • Will this project need permits or inspections in my jurisdiction, and who will check with the local building department and obtain them?
  • How will you control dust and protect the rest of the home during cutting and demolition?
  • Can you provide current insurance information, applicable license details, references for similar work, and written warranty terms?

Do it yourself or hire a pro?

A small, straightforward backsplash or limited dry-area repair may suit a careful DIYer with the right tools and time, provided the surface is sound and the layout is simple. A shower, tub surround, large or uneven floor, exterior installation, major demolition, or work near plumbing, electrical, or structural components is usually better handled by a qualified pro. Tile cutting and demolition can create hazardous dust; OSHA recommends appropriate controls such as wet methods or dust collection for silica-generating work. In older homes, do not disturb suspect flooring or other materials until a properly trained and accredited asbestos professional has assessed them.

Red flags

  • The pro says waterproofing is unnecessary in a shower or cannot explain how the wet-area assembly will be protected.
  • They propose starting demolition before checking whether older flooring or other suspect material may contain asbestos.
  • They dismiss dust control for cutting or demolition, or plan to dry-sweep silica-containing dust.
  • They will not provide a written scope, proof of insurance, applicable license information, or clear warranty terms.
  • They insist permits are never needed, demand that you conceal unpermitted work, or pressure you to make a large payment before the scope and schedule are documented.

Frequently asked questions

Do I need a permit to install tile?

It depends on the jurisdiction and scope. A tile-only surface replacement may not require a permit, but remodeling that changes plumbing, electrical, structural, or other regulated work may. Contact your local building department before work starts.

How long does tile installation take?

A small, uncomplicated area may take a few workdays. A shower or full bathroom project often takes longer because of demolition, surface repairs, inspections, and required curing time. Get a project-specific schedule from the installer.

Does a tile shower need waterproofing?

Yes. Tile and grout alone are not a substitute for a properly designed shower waterproofing system. Ask the installer to identify the system and explain how its seams, corners, drain, and penetrations will be handled.

Can new tile be installed over old tile?

Sometimes, if the existing tile and the surface beneath it are sound, stable, and suitable for the chosen installation system. A pro should assess adhesion, moisture, added height, and transitions before recommending it.

Should grout or tile be sealed?

It depends on the tile, grout, and product instructions. Some materials require or benefit from sealer, while others do not. Ask the installer to provide the products used and their maintenance instructions.

How do I check whether a tile contractor is licensed?

Check your state or local licensing board, since requirements vary across the United States and may depend on the work. Verify the license status and scope directly with the board, and separately confirm insurance.

Sources

Tile services

    Tile by city